Impact crushers are commonly used for crushing stone in industries such as
mining, construction, and highway construction. Their key features include a
high-speed rotor and a high-hardness impact plate, which rapidly impact and
crush materials, resulting in high-quality, uniformly shaped particles. They
also offer low energy consumption and easy maintenance, making them suitable for
crushing stone and ores of varying hardness. Impact crushers have become an
indispensable component in these industries.
I. Introduction to Common Accessories for Impact Crusher Equipment
Common accessories for impact crushers include the hammer, impact plate,
rear chamber plate, crushing chamber, and loading and discharge devices. The
hammer, used for impact crushing, is one of the primary working components of an
impact crusher. The impact plate is a plate fixed within the crushing chamber
that absorbs the impact of the material and promotes further crushing. The rear
chamber plate, an adjustable plate located behind the impact plate, is used to
adjust the crusher's discharge size. The crushing chamber is the space that
holds the material for crushing. The loading device feeds the material to be
crushed into the crushing chamber. The discharge device discharges the crushed
material from the crusher.
II. What are the installation requirements for impact crusher
equipment?
Impact crusher equipment must be installed on a level concrete foundation
and secured with anchor bolts. During installation, ensure the main unit is
perpendicular to the horizontal. After installation, check all bolts for
looseness and the main unit door for tightness. If any loose bolts or loose main
unit doors are found, tighten them. Configure the power cord and control switch
according to the power supply of the equipment. After the inspection, a no-load
test run can be performed. If the test run is normal, production can begin. To
facilitate maintenance and overhaul, the equipment should be installed at a high
location. Sufficient space should be reserved for easy operation and repair.
During installation, special care should be taken to protect all components
of the impact crusher to prevent damage or collision. Particularly vulnerable
parts such as the rotor and blow bars should be handled with care. After
installation, the equipment should be inspected to ensure all components are
correctly installed and securely fastened. A no-load test run should then be
conducted to observe the equipment's operation. Any abnormalities should be
adjusted and addressed promptly.
If you need more information about impact crusher equipment, please feel
free to contact our online customer service. We will respond promptly to any
questions you may have.
